EN
Instructions for use for the user
p. 21/28
5.2.
Heating for the first time
CAUTION!
Formation of smoke and odours when heating up for the first time
Materials used during the manufacturing process will be present on
the new heating elements. These evaporate when the sauna heater is
heated up for the first time. This produces smoke and an unpleasant
odour. Breathing in the fumes or smoke can be harmful to your health.
Perform the following steps when
operating the sauna heater for the first
time
and if the
heating elements for the sauna heater have been replaced
.
This prevents damage to health due to the fumes and smoke produced when
heating for the first time.
1. Select the highest possible temperature on the sauna control unit.
2. Heat up the sauna heater for half an hour.
Do NOT remain in the sauna cabin during this period.
3.
Allow the sauna cabin to ventilate thoroughly after heating for the first time.
4. If no smoke or odours form the next time the sauna heater is heated, you
can start to use the sauna.
If smoke or odour is produced again, leave the sauna cabin immediately
and repeat the initial heating up process followed by ventilation.
Содержание sentiotec Qube
