HARVEST H1392, Инструкция по сборке

Страница: 35 / 66

35
1) Insert the Dowel pin with one washer on the outside into the hole in the axle bracket; push it all the way
through.
FIG 24- 9
2) Next place the 2nd washer on the Dowel pin and tap in the pin (FIG 24-10) move the lower scissor arm and
once the holes are aligned with the hydraulic cylinder bracket, use (3) 5/8" x 1 1/2" flange bolts in the 3
holes leaving the inside hole open for now
3) ** Repeat Steps 8&9 for the opposite side lower scissor arm. **
4) locate upper scissor arm bracket
FIG 24- 11
5) Move the bracket in between the lower scissor arms aligning make sure that the upright rest arms are
leaning forward, away from the axle. (FIG 24-12)
6) Use (3) 5/8" x 1 1/2" flange bolts and flange nuts tap in from the outside in Make sure that you leave the
lower front bolt hole open for now
7) **Do not tighten bolts for now. **
8) Locate upper scissor arm
9) Hook strap to 17" scissor Dowel pin bracket,(FIG 24-13)
10) Take a 20" threaded bolt and spread open the lower scissor arms,
11) take the 17” scussor pin and tap
in the 3/8” roll pin on one side(FIG 24-14)
FIG 24- 10
FIG 24- 12
FIG 24- 13 FIG 24- 14