H13XT
Assembly
Manual
Page
22
of
33
Step 30
Locate the right scissor arm. Attach the scissor arm to the axle using a 1-1/4” x 6-3/4” pin. Secure the pin with
(2) 3/8” x 3” roll pins. (Fig. 30.1) Attach the other end of the scissor are to the cylinder cross tube as shown in
fig. 31.2. Fasten the scissor arm to the cross tube using (5) 3/4” x 2” hex bolts & flange nuts. Repeat this step
for the left scissor arm.
Step 31
Locate the transport support tube assembly. Move the bracket between the two scissor arms. Make sure that
the upright rest arms are leaning away from the axle. Attach each side using (4) 5/8” x 1-1/2” flange bolts &
nuts. Do not tighten.
Fig. 30.1
Fig. 30.2
Fig. 31.1
Fig. 31.2
