manualshive.com logo in svg

Harvest Healthcare WOBURN COMMUNITY 1200, Общее руководство пользователя и инструкции по безопасности

Поделиться
Скачать
Harvest Healthcare WOBURN COMMUNITY 1200 Скачать руководство пользователя страница 13

E

 [email protected]      www.harvesthealthcare.co.uk

13

GENERAL INFORMATION

4.6  

ACCESSORIES

The optional accessories available include a patient lifting pole of which the safe working load 
of 80 kg 

must not be exceeded

. The lifting pole may only be used within its admissible 

adjusting range which is defined by the sleeve on the bed. Otherwise the bed may tip and 

result in serious injury. 

4.7  

ELECTROMAGNETIC COMPATIBILITY

Regarding their emitted interference and interference resistance the electric motor units 
comply with the requirements of EN 60601-1-2:2007 (see section 

13.7

), but it is possible that 

electrical devices interfere with each other. In this case switch off the care bed for a short time 
or remove the interference source. We refer to the paper of the BfArm reference n° 9/0508 
(Bundesinstitutfür Arzneimittel und Medizinprodukte).

4.8 

TRANSPORT & STORAGE

4.9 

SERVICE LIFE & DISPOSAL

The normal service life for care beds in domestic use is approximately 5 years. The 
care bed must not be disposed of as normal domestic waste after its service life 
has expired. To ensure that it is disposed of in an environmentally compatible way 
please contact Harvest Healthcare Ltd.

The care bed can be easily 
transported. On the transport 
device provided it can be 
manoeuvred in very small spaces 
on the bed’s castors.

If the bed is stored for a lengthy 
period, the 9V block battery should 
be removed, otherwise it will 
discharge.

State as delivered

(in cover)

Care bed on the 

transport device

When the bed is moved on the transport frame take care not to allow it to 
overbalance. The narrow, tall design saves storage space but may tip over 
if handled carelessly.

Содержание WOBURN COMMUNITY 1200

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды