manualshive.com logo in svg

Harvest Healthcare WOBURN COMMUNITY 1200, Общее руководство пользователя и инструкции по безопасности

Поделиться
Скачать
Harvest Healthcare WOBURN COMMUNITY 1200 Скачать руководство пользователя страница 12

T

 +44 (0)1709 377172     

F

 +44 (0)1709 377173

12

4.4  

 CLEANING & DISINFECTION

Before cleaning and disinfection the mains plug must be unplugged 
and hung up safely. Plugs for the handset and the motors that are 
plugged into the control box must remain in their sockets. This is 
necessary to prevent water from getting into the control system. 

Do not immerse electrical components in water but wipe with a damp cloth. The 
electrical components must not be cleaned with a high pressure cleaner or a water 
jet! Only disinfection by wiping is allowed.

Always wear waterproof gloves when cleaning and disinfecting to avoid skin 
irritation.

Attention: In the event of disinfection by spraying on a large scale with products 

containing alcohol there is a danger of explosion and fire.

4.5  

SERVICING & MAINTENANCE

Servicing work must only be carried out by persons who have at least read the 

safety regulations and are qualified according to the MPBetreibV (Operators of 

Medical Products Ordinance) § 4 and 6. 

A technical check and/or safety inspection must be conducted at least 
once a year and after a lengthy break in use and before each further 
use. See section 10.2.

Any defects, damage or signs of wear must be rectified without delay. Only original 

spare parts from Harvest Healthcare Ltd may be used, otherwise all guarantees or 
warranties will be excluded. 

The 9V block battery is the energy store for electrical emergency lowering in the 

event of a power failure. The energy store is sufficient for one emergency lowering 

only and must then be replaced. If the expiry date of the battery has elapsed then 
it should be replaced immediately. Since batteries are subject to self-discharging, 
it is recommended that the battery is replaced every two years if not used. Ensure 
that it is a type 6LR61 alkaline manganese battery and not any other type. Used 
batteries must be disposed of in an environmentally compatible way.

Please check all fixings on your bed at least once a month. Pay special 

attention to sleeping platform connections.

GENERAL INFORMATION

Содержание WOBURN COMMUNITY 1200

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды