15
W
a
rn
e
r
In
s
tr
u
m
e
n
ts
B
ip
o
la
r
T
e
m
p
e
ra
tu
re
C
o
n
tr
o
ll
e
r
M
o
d
e
l
C
L
-1
0
0
www.warneronline.com
Service Notes
Please refer all questions regarding service to our Engineering Department.
A) If the instrument POWER light fails to light, check the fuse at
the rear panel (located in the black POWER INPUT MODULE). If the
fuse is found to be defective replace it with a 5x20 mm, 0.8 A,
slow-blow fuse (0.4 A for facilities using 220-240 V line voltages).
If the replacement fuse also fails, please call Warner Instruments
for assistance.
B) Occasionally, a knob on the front panel will loosen after long use.
These are "collet" style knobs and are tightened with a screw located
under the knob cap.To gain access to the adjustment screw, pry the
cap off with a thin bladed screwdriver or similar tool.
C) Should service be required, please contact the factory.The problem
may often be corrected by our shipping a replacement part. Factory
service, if required will be expedited to minimize the customer
inconvenience.
D) Instruments are inspected immediately upon receipt and the
customer is notified if the repair is not covered by the warranty.
Repairs can often be completed in 1-2 days from our receipt of the
instrument.
E) If factory service is required, please observe the following
instructions:
1) Package the instrument with at least 3 inches of cushioning on
all sides. Use the original shipping carton if it is available.
2) Insure the shipment for its full value.
3) Include with the shipment an explanation of the problem
experienced.
IMPORTANT for Customers Outside of the U.S.:
Please contact us before return shipping any goods.We will provide instruc-
tions so that the shipment will not be delayed or subject to unnecessary
expense in clearing U.S. Customs.
Warranty & Service
(Cont’d)
Publication 5702-001-REV-A
