Dear customer,
Thank you for purchasing our ceramic cooktop. Our product can serve you many years to your
satisfaction. Please read the instruction manual carefully before installation. Keep it in a safe
place after reading for future reference.
Working Principle
The microcomputer ceramic cooktop employs resistance wire heating, and uses power
regulation with the microcomputer controlling heating time and preventing overheating.
Safety
High temperature protection
When an excessive temperature is detected , the thermostat switches off.
Residual heat indicators
After using the hob, waste heat remains in the heating area. The indicator shows the code
“H”, warning you not to touch the heating area.
Auto shut down protection
The cooktop will automatically shut down in the following sequence.
Power level
1
2
3
4
5
6
7
8
9
Default working time(hour)
10
8
7
6
5
4
3
2
1
Installation
Selection of installation equipment
Drill holes on the bench surface according to the sizes shown in the drawing. For the purpose of
installation and use, a minimum of 50 mm space shall be preserved around the hole. Be sure the
thickness of the bench surface is at least 30mm. Please select heat-resistant bench material to avoid
larger deformation caused by the heat radiation from the hotplate.
As shown in Figure (1)
Under any circumstances, make sure the ceramic cooker hob is well ventilated and the air inlet
and outlet are not blocked.Ensure the ceramic cooker hob is in good working order