HARTMANN TRESORE
6
• While the door is closed, press the
“close”
key.
• The display shows
“BA_LOW”
-> battery low. Please replace.
• The display shows
“BA_HI”
-> battery OK.
6 | CHECKING BATTERY POWER
1. Normal messages
“AGAIN”
-> Repeat the last input.
“BA-HI”
-> battery status normal.
“BA-LO”
-> battery status low. Batteries should be replaced.
“CLOSE”
-> Locking mechanism extended.
“OPEN”
-> Locking mechanism retracted.
“DONE”
-> Input complete.
“NEW”
-> Enter a new code.
2. Error messages
An error message on the display means that an operating error has occurred. In this case, please
follow the steps below:
ERROR
An incorrect code has been entered. Please enter the correct code.
ERROR 1
This message means that the door cannot be opened as the locking pins are tilted. In this
case, please first try to remedy the tilt by shaking the door slightly. Otherwise, carry out
emergency opening
ERROR 2
The locking pins are being held back and cannot be extended (the door cannot be completely
closed at this time). To solve the problem, press the door firmly into its frame before continu-
ing with the locking process.
HOLDxx
This error message appears after 4 consecutive incorrect entries of the code. The safe is
currently on hold. The two digits (xx) after
“HOLD”
indicate the duration of the hold time
in minutes. During this time, opening is only possible with the emergency opening key or,
optionally, with the reader.
SECURE
If the safe displays
“Secure”
, the batteries are very low and should be replaced as soon as
possible.
7 | DISPLAYS
