�����������������������������������������
This set-up is used for
Hart Dynamics Studio
Master, Studio Master
5.3, Custom A, Mega
Pro and Hart Pro 5.3
Drumsets.
With this configuration,
the Ride and Bell triggers
on the ride cymbal are
plugged in to 2 separate
inputs via the AUX input
using a TRS (Stereo)
cable. This allows for maxi-
mum control of the Ride
and Bell triggering and
sounds. You can use any
Ride sound in combination
with any Bell sound.
�����
�����
���
�
���
�
����
����
�������
�����
��
���
������
���������
�����������
�����
�����
�����������
�����
�����
�����
�����
�����������
�����
�����
��
�����
����
���
�������
NOTE: You may also plug the
TRS (stereo) cable from the
ride cymbal in to the ECSTAD
ADAPTER, and then in to the
RIDE Input. If you use this set-up
you MUST use an “X” Ride Sound
(Rock Ride, Rock Bell, “Rock X”).
The “X” Ride sounds have both
Ride and Bell sounds.This set up
uses only one input and is use-
ful if you wish to add other trigger
devices (ECYMBAL, HAMMER,
etc.). AUX 11/12 is TRS (stereo)
input which accesses 2 separate
trigger/instrument channels. Input
9 may also be used for another
trigger device. Input 1/2 is also 2
separate inputs and you may use
a Y cable for an additional trigger
device besides the bass drum.
���
�
�
NOTE: Input
AUX 1 (11) must
be programmed
to a BELL
����
������
�����
�����
�����������
�����
�����
�����
�
�����
����
��
�����
�����
��
����
��
�����������
�����
�����
�����������
�����
�����
�����������
�����
�����
�����������
�����
�����
�����������
�����
�����
�����������
�����
�����