MAT-100
Aerobics Mat Trolley
Code:
Product:
Assembly Instructions
Assembly Instructions
3
Position the MDF base onto the trolley base frame,
ensuring the holes are in line and the beveled edge
upper-most to the front. Attach the semi-assembled side
and back frame to the MDF base using the two M8 X
75mm hex bolts, the remaining four of the M8 skiffy
washers and the two remaining M8 nylocks.
4
To attach the four wheels, position the partly assembled
trolley onto it’s side.
Using the four M10 X 95mm hex bolts with a M10 nylon
washer on each bolt attach the wheels to the base ensuring
that the two wheels with brakes are at the front of the
trolley. Place a M10 nylon washer and a M10 nylock on
each bolt and tighten.
Finally insert the eight inside caps into the exposed ends of
the trolley.
1
Before constructing the Aerobics Mat Trolley remove
all protective packaging. Identify all the parts shown in
the large view of the Aerobics Mat Trolley.
2
Identify the back frame and the two side frames and
assemble using the four M8 X 60mm hex bolts, eight
of the M8 skiffy washers and four of the M8 nylocks.
All manuals and user guides at all-guides.com
