Harris Unity XG-100P Скачать руководство пользователя страница 133

Страница: 133 / 135

Harris Corporation, a Delaware Corporation, through its RF Communications

Division (hereinafter "Seller") warrants to the original purchaser for use

(hereinafter "Buyer") that Equipment manufactured by or for the Seller shall be

free from defects in material and workmanship, and shall conform to its

published specifications. With respect to all non-Seller Equipment, Seller

gives no warranty, and only the warranty, if any, given by the manufacturer

shall apply. Rechargeable batteries are excluded from this warranty but are

warranted under a separate Rechargeable Battery Warranty (ECR-7048).

Seller's obligations set forth in Paragraph C below shall apply only to failures

to meet the above warranties occurring within the following periods of time

from date of sale to the Buyer and are conditioned on Buyer's giving written

notice to Seller within thirty (30) days of such occurrence:
1.

For fuses and non-rechargeable batteries, operable on arrival only.

For parts and accessories (except as noted in B.1) sold by Seller's
Service Parts Operation, ninety (90) days.

For P7300, P7200, P7100IP, P5400, P5300, P5200, P5100, P3300,
M7300, M7200 (including V-TAC), M7100 IP, M5300 and M3300 radios,
two (2) years, effective 10/01/2007.

For UnityTM XG-100P, three (3) years.

For all other equipment of Seller's manufacture, one (1) year.

If any Equipment fails to meet the foregoing warranties, Seller shall correct the

failure at its option (i) by repairing any defective or damaged part or parts

thereof, (ii) by making available at Seller's factory any necessary repaired or

replacement parts, or (iii) by replacing the failed Equipment with equivalent

new or refurbished Equipment. Any repaired or replacement part furnished

hereunder shall be warranted for the remainder of the warranty period of the

Equipment in which it is installed. Where such failure cannot be corrected by

Seller's reasonable efforts, the parties will negotiate an equitable adjustment

in price. Labor to perform warranty service will be provided at no charge during

the warranty period only for the Equipment covered under Paragraph B.3 and

B.4. To be eligible for no-charge labor, service must be performed at Seller's

factory, by an Authorized Service Center (ASC) or other Servicer approved for

these purposes either at its place of business during normal business hours,

for mobile or personal equipment, or at the Buyer's location, for fixed location

equipment. Service on fixed location equipment more than thirty (30) miles

from the Service Center or other approved Servicer's place of business will

include a charge for transportation.

Seller's obligations under Paragraph C shall not apply to any Equipment, or

part thereof, which (i) has been modified or otherwise altered other than

pursuant to Seller's written instructions or written approval or, (ii) is normally

consumed in operation or, (iii) has a normal life inherently shorter than the

warranty periods specified in Paragraph B, or (iv) is not properly stored,

Содержание Unity XG-100P








































































































































Результаты поиска

Содержание Unity XG-100P

Отзывы:

Бренды по названию

Популярные бренды

Harris Unity XG-100P, Руководство по эксплуатации

Результаты поиска

Содержание Unity XG-100P

Отзывы:

Бренды по названию

Популярные бренды