Harris TVS-D 660, Руководство оператора

Страница: 11 / 52

HOME Menu
The sub-menus are all accessible via keys.
In the HOME MENU the following parameters are permanently displayed:
Parameter Remark
L, R, M, A*, B* Indication of the operation mode toggels
between L (local) , R (remote), M
(monitoring), A* (active devices) and B*
(backup devices).
ERROR/ WARNING/ INFO Indication of present errors / warnings/
additional information
* only in a spare sytem
Three operation modes are available to meet different user requirements:
In the LOCAL operation mode remote control is completeley disabled (no remote control
- signalling depends on the local setting).
In the REMOTE operation mode (so in A and B ) local indication, but no local control is
possible.
In the MONITORING mode local control is possible only after entering the password
(local password-protected mode).
Use the remote switch on the front-panel to switch between local and remote operation
mode.
Move the cursor to SIGNALING IF LOCAL to switch the remote signalling for local
operations on or off.
NOTE: Only visible if the remote interface is selected in the installation
menu
Change to the ACCESS submenu in the MISCELLANEOUS menu to activate/deactivate
the MONITORING mode.
The active operation mode is indicated by the LC-display, which will change from L
(local / local with signalling “loc sig”) to R (remote) or M (monitoring).
Operator manual
TVS-D 660 LC-Display 2 - 7
Menu Operation