SEL-MDX1
Installation and Operation Manual
10
Copyright © 2011, Harris Corporation
2
Reinsert the module.
3
Install the new module software using the Selenio user interface.
4
Remove the module, and then return
Switch 1
to the
Off
position.
5
Reinsert the module.
The module is now running the new software
.
Parameter Descriptions
The software controls described in this section are organized according to the block
diagram shown in the
Configuration > Block View
of the Selenio user interface.
Module Name Block
Name
Use this field to enter a unique name for the module, up to 31 characters in length.
Function Map
Type
The MDX module has eight function blocks each of which can be configured as either a
multiplexer (
Type
=
Mux
) or demultiplexer (
Type
=
Dmx
).
When the type of the Nth function is set to
Mux
, the corresponding Nth
ASI/SMPTE 310M
external connector will be configured as an output.
When the type of the Nth function is set to
Dmx
, the corresponding Nth
ASI/SMPTE 310M
external connector will be available as an input.
