Harris RF-7800B-DUO24, Инструкции по эксплуатации

Страница: 62 / 96

4-9
RF-7800B
CONFIGURATION
R
4.4.2 Registration, GPS, Properties
See Figure 4-5 and Figure 4-6 . The Properties page shows the current status of the BGAN terminal. The three status
items in the top left-hand corner of the screen update automatically when the status of that item changes:
•
Signal: Satellite Signal Strength
•
BEAM: Beam Identification (ID)
•
BATT: Battery Status
The remaining properties page items are described below.
Terminal Registration Status : Shows as Registered with Home Network or Not Registered. If not registered, select
the Register with Network button. If the BGAN terminal is not registered, but the Register button is greyed out,
then the terminal is actively attempting to register. Please wait. Additionally, the BGAN terminal must be registered
prior to sending IP data or creating ISDN calls.
NOTE
RF-7800B-VU104 has Bypass Antenna Pointing turned on by
default, enabling it to automatically register with the Network
as long as this setting is enabled.
Packet Switched (IP Data) Service : Indicates whether the BGAN terminal is Packet Switch (PS) attached with the
Network. Network connections, either Background or Streaming, must be set up to transfer IP data.
Circuit Switched (ISDN) Service : Indicates whether the BGAN terminal is Circuit Switch (CS) attached with the
Network. CS calls can be made once the BGAN Terminal is Registered with the network.
GPS Position : Displays the current GPS position status. The terminal will always report whether the GPS Fix
Quality is Acquiring , 2D , or 3D , and the Last Update time, using Greenwich Mean Time (GMT). The GPS display
policy, which comes from the satellite, determines whether or not the Longitude and Latitude information will be
displayed to the user.
Emergency Call Numbers : Displays the Emergency call numbers that can be used with the BGAN terminal.
BGAN Terminal Software Version : Displays the current version of software that is running on the BGAN terminal.
Satellite Modem IMEI : Displays the International Mobile Equipment Identity (IMEI) number of the BGAN
terminal.
Satellite Modem IMSI : Displays the International Mobile Subscriber Identity (IMSI) number of the Universal
Mobile Telecommunications System (UMTS) Subscriber Identification Module (USIM) card in the BGAN
Figure 4-5. BGAN Terminal Configuration Detail