Chapter 1
Introduction
4
Copyright © 2003, 2005-2006, 2010, Harris Corporation
LEDs, Switches, and Jumpers
Each 6800
+
module has a number of LEDs assigned to indicated varying states/
functions.
Table 1-1
briefly describes generic 6800
+
LEDs, switches, and jumpers.
For HSD/HSE6800
+
modules, module-specific functions are listed in
Table 3-5
on
page 23. See
Chapter 3
,
Operation
for more information on specific HSD/
HSE6800
+
module controls, LEDs, and jumpers.
Table 1-1
Generic 6800
+
Module Features
Feature
Description
Module status
LEDs
Various color and lighting combinations of these LEDs indicate
the module state. See
Table 3-4
on page 23 for more
information.
Control LEDs
Various lighting combinations of these control LEDs
(sometimes referred to as “Bank Select LEDs”) indicate the
currently selected bank. (This item not available on the HSD/
HSE6800
+
)
Monitoring
LEDs
Each 6800
+
module has a number of LEDs assigned to
indicate varying states/functions.
Local/remote
control jumper
Local
: Locks out external control panels and allows
card-edge control only; limits the functionality of remote
software applications to monitoring
Remote
: Allows remote or local (card-edge) configuration,
operation, and monitoring of the HSD/HSE6800
+
