Harris FERVA CORSAIR, Инструкция по установке и эксплуатации

Страница: 12 / 15

12
Operating Instructions for the
Thermoelectric Generator (TEG)
Your TEG is designed to automatically turn on when the fire is in use and will auto-
matically turn off once the fire has cooled down. There is no on/off switch.
The fan has 2 settings.
(I) Low or quiet setting
(II) High setting.
Adjust the fan speed to suit your needs. The high setting should be used to distrib-
ute the heat quicker and the low setting to be used once the room is up to tem-
perature or you desire the quiet setting.
The LED light indicates when the unit is generating power.
When you light the fire, it will take approximately 20 minutes until the fan is opera-
tional. The LED light will come on some time before the fan has started. The fan
may run for some time after the fire has gone out.
Your TEG does not require any maintenance, but the fire will require normal main-
tenance as illustrated in this manual.
The USB socket can be used to charge cell phones and other portable USB devices.
It supplies 5VDC @500mA. Only connect one device at a time.
IMPORTANT
It is very important that the 2 rear fire bricks remain in place. If removed, the TEG
may be damaged from overheating. Cracks in the rear bricks are totally acceptable
as long as they remain in place. If your rear bricks are severely damaged and can
no longer remain in place, they should be replaced before using the fire.
Because the TEG is a low voltage system, there is no risk of electrocution
from the appliance. DC devices are considered very safe.