background image

Copyright Information

Copyright 2008 Harris Corporation, 1025 West NASA Boulevard, Melbourne, 
Florida 32919-0001 U.S.A. All rights reserved. This publication supersedes all 
previous releases. Printed in Canada. 

This product and related documentation are protected by copyright and are 
distributed under licenses restricting their use, copying, distribution, and 
decompilation. No part of this product or related documentation may be 
reproduced in any form by any means without prior written authorization of 
Harris Corporation and its licensors, if any.

This publication could include technical inaccuracies or typographical errors. 
Changes are periodically added to the information herein; these changes will be 
incorporated into new editions of the publication. Harris Corporation may make 
improvements and/or changes in the product(s) and/or the program(s) described 
in this publication at any time.

Warranty Information

The limited warranty policy provides a complete description of your warranty 
coverage, limitations, and exclusions, as well as procedures for obtaining 
warranty service. To view the complete warranty, visit our Harris Broadcast 
Communications Division Premier Customer Support website.

Содержание CCS-NET-24







Отзывы: