FMP-112968-001
Page 6 of 6
Converting from 10Base-T
to
T1/E1
1.
Turn the unit off.
2.
Remove the fuse and set it aside.
3.
Disconnect the Data, Antenna, and Power connections.
4.
Place the radio on a flat, clean, static-free work surface.
5.
Remove the 8 cover screws. Set them and the cover aside.
6.
Remove the 10Base-T card. Wrap it in a static-free bag and store it
in a safe place.
7.
Aurora 2400: Install jumpers on P4 and P5 for the modem. (Refer
to Table 1 for strapping.)
Aurora 5800: Install jumpers on P10 and P11 for the modem.
(Refer to Table 2 for strapping.)
8.
Reinstall the cover. Insert the screws and tighten them.
9.
Connect the 10Base-T Data, Antenna, and Power cables.
10.
Connect the T1/E1 Interface cable.
11.
Reinstall the fuse and turn the unit on.
End of procedure.
