Harris AES-3981, Инструкция по установке и эксплуатации

Страница: 26 / 56

14 AES-3981 Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Chapter 2: Installation and Removal
11. Wait for the message File transfer to device succeeded in the
status bar.
If an fl0 folder is included in the .zip file, the files within that folder
must now be uploaded as shown below. (In some cases, the README
file may indicate other separate files must be uploaded instead.)
Follow these steps to upload the remaining files:
1. On the
Software Upgrade tab, select the /slotx/fl0 (where x is the
slot number) directory in the Select the device directory to
transfer to: field.
2. Click Add, and in the Add Upgrade Files box, browse and select
the fl0 folder in the module’s upgrade package.
3. Click OK .
4. Select the files shown in the Add Upgrade Files box, and then
click OK .
5. Select and delete unwanted files (for example: vxWorks.lzs ) in the
Add upgrade files for transfer to device: field by clicking
Remove .
6. Click Perform Transfer and then click Yes .
7. Wait for the message File transfer to device succeeded .
This may take a moment.
8. Click Reboot Device and then click Yes.
9. Wait 30 seconds and then close the Configuration... box.
The module name appears at the card edge.
CAUTION
You must delete unwanted files in the Add upgrade
files for transfer to device: field before transferring
the files. Otherwise, the upgrading procedure will
fail.