Harris ADC 100, Руководство пользователя

Страница: 35 / 128

Harris ADC Device Server User’s Guide
Installation 1-7
This password may be changed at any time from within the configuration utility. See
“Changing the Password” on page 2-23 for details on how to change the password.
Proceed to “Configuration Manager” on page 2-1 to configure the client for use.
Command Line Parameters
The configuration installation program creates a desktop shortcut containing the executable
filename plus a command line parameter. Example:
C:\CONFIG\ADCNTCFG.exe NTCONFIG
The NTCONFIG parameter indicates the name of the client running the configuration utility.
This name must be unique on the Harris network. If the configuration utility is installed on
more than one client, each client must have a unique name.
The device server installation also creates a desktop shortcut containing a command line
parameter. Example:
C:\SERVER\adc100nt.exe MAIN
The MAIN parameter is the default name given to the device server. This name must be
unique on the Harris network. We recommend you change this name to something different,
to ensure that no two servers have the same name.
Command line parameters are limited to 16 characters.
Upgrading from DOS to NT
NOTE:
This section applies only if you are upgrading from Harris’ ADC100 DOS Server
to the ADC Device Server. If you are a new user, skip this section.
1.
When copying the .ini files from a DOS ADC100 server to an ADC Device Server, copy the
files ADC100.INI to LISTCONF.INI and ADC100NT.INI. From a command prompt, type:
copy ADC100.INI LISTCONF.INI
copy ADC100.INI ADC100NT.INI