Harrington Hoists RHN02D-20A-20D Series Скачать руководство пользователя | Manualshive

Страница: 4 / 112

background image

4

1.0

Important Information and Warnings

1.1

Terms and Summary

This manual provides important information

for personnel involved with the installation, operation and

maintenance of this product. Although you may be familiar with this or similar equipment, it is strongly recommended
that you read this manual before installing, operating or maintaining the product.

Danger, Warning, Caution and Notice

- Throughout this manual there are steps and procedures that can present

hazardous situations. The following signal words are used to identify the degree or level of hazard seriousness.



Danger indicates an imminently hazardous situation which, if not avoided,

will

result in

death or

serious injury

, and property damage.



Warning indicates an imminently hazardous situation which, if not avoided,

could

result in

death

or serious injury

, and property damage.



Caution indicates a potentially hazardous situation which, if not avoided,

may

result

minor

or

moderate injury

or property damage.



Notice is used to notify people of installation, operation, or maintenance information which is

important but not directly hazard-related.



These general instructions deal with the normal installation, operation, and maintenance situations encountered with
the equipment described herein. The instructions should not be interpreted to anticipate every possible contingency
or to anticipate the final system, crane, or configuration that uses this equipment. For systems using the equipment
covered by this manual, the supplier and owner of the system are responsible for the system’s compliance with all
applicable industry standards, and with all applicable federal, state and local regulations/codes.

This manual includes instructions and parts information for the RHN trolley hoist. Therefore, all instructions and parts
information may not apply to any one type or size of specific trolley hoist. Disregard those portions of the instructions
that do not apply.

Record your trolley hoist’s Product Code and Serial Number on the front cover of this manual for identification and
future reference to avoid referring to the wrong manual for information or instructions on installation, operation,
inspection, maintenance, or parts.

Use only Harrington authorized replacement parts in the service and maintenance of this trolley.

«
...
2
3
4
5
6
...
»

Содержание RHN02D-20A-20D Series

















































































































Отзывы:

Нет отзывов

Похожие инструкции для RHN02D-20A-20D Series

Бренд: Yale Страницы: 30

Бренд: Yale Страницы: 20

Бренд: TECALEMIT Страницы: 53

Бренд: Tractel Страницы: 40

Бренд: Tractel Страницы: 36

Бренд: Tractel Страницы: 84

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды