Harrington Hoists RHN02D-20A-20D Series Скачать руководство пользователя | Manualshive

Страница: 30 / 112

background image

30

Figure 3-16

3.8 Hoist Limit Switches and Adjustment

The RHN wire rope hoist is equipped with a geared limit switch in the hoist control panel box. The limit switch is
equipped with four switches, all of which are utilized for standard hoist functions. The four limit switch positions are
as follows: S1 (Upper Safety Limit), S2 (Lower Limit), S3 (Upper Limit), and S4 (Speed Transition Limit).

The wire rope hoist is also equipped with a BLS (Block Limit Switch) as a standard feature.

3.8.1

Description and order of the limit switch function, including BLS as hook travels in the UP direction – See

Figure 3-17

.

S4

↑↑

(Speed Transition Geared Limit

): As the hook travels in the up direction, the first switch

position to activate will be S4

↑↑

. If the hoist is being operated in the up direction, high speed will be

deactivated when the S4

↑↑

switch is activated. The hoist will then remain in low speed until reaching the

switch position S3

↑

(Upper Limit).

S3

↑

(

Upper Geared Limit

): When the S3

↑

switch position is activated, hook travel is disabled in the up

direction. The hoist can still be operated in down direction.

BLS

↑

(

Block Operated Upper Limit Switch

): See also

Figure 3-19

.

In addition to the geared limit switch, there is also a block operated upper limit switch (BLS

↑

) installed

on the hoist. The BLS

↑

switch opens when the hook block lifts a weight and releases the tension from

the cable that holds the switch in the closed position. The BLS

↑

is adjusted so that the S3

↑

(Upper

Geared Limit) switch position activates first and the BLS

↑

second as a “back-up” safety.

S1

↑

(

Upper Safety Geared Limit

): In the event of a major malfunction where the upper limit

switch

(S3

↑

) and the block operated upper limit

switch

(

BLS

↑

) are overrun, the S1

↑

switch position is

activated and disables all directional movement and control. The only way to operate the hoist after the
S1

↑

switch has been activated is to eliminate the source of the problem and bridge (jumper) terminals

110 to 116 on the terminal strip located at the bottom of the hoist control panel box.

WARNING: If the

S1 Geared Limit Switch position has been activated, a major malfunction has occurred.
Therefore, the equipment should be inspected by a qualified individual before attempting to
resume hoist operation.

3.8.2

Description and order of the limit switch function as the hook travels in the DOWN direction – See

Figure 3-18.

S4

↓ ↓

(

Speed Transition Geared Limit

): When the hook is located at the S3 (Upper Geared Limit)

position, and moving in the down direction, the hoist will remain at low speed until the hook is below the

«
...
28
29
30
31
32
...
»

Содержание RHN02D-20A-20D Series

















































































































Отзывы:

Нет отзывов

Похожие инструкции для RHN02D-20A-20D Series

Бренд: HADEF Страницы: 28

Бренд: POWERTEX Страницы: 12

16.10PCBS20025030

Бренд: POWERTEX Страницы: 18

Бренд: HERKULES Страницы: 224

HUBBELL С309-0458

Бренд: CHANCE Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды