Harrie Leenders HL2 Instructions for Installation, Use and Maintenance
14
How to use the HL2
1. Open the aircontrol slide completely (pushed to the right). Put the
throttle flap in the opened position (the position of the handle corre
sponds to the position of the throttle flap). For additional draught, set
the window at the top ajar.
3. Add solid logs. The amount depends on the heat needed. Stack
lightly. Each time you add fuel, do not load more than up to 1/3 of the
combustion chamber. Each time you have added a load, give the fire
some extra oxygen. Keep doing this until the fuel is burning properly.
5. A quietly burning fire is obtained by closing the air slide even more
by pushing it inwards. This will reduce the draught in the HL2. For a
glowing mass of charcoal, you may close the air slide even further. The
heat will then last longer. When you want to let the fire die down, you
must open the air slide more.
2. Light the stove with paper, cardboard or firelighters and small wood.
Stack lightly. Maintain a good fire for a while. This will ensure a good
draught, will keep the flue cleaner, and will give you a nice fire for the
solid logs.
4. Using the aircontrol slide in conjunction with the throttle flap, you
can regulate the residual burning.
