Harrie Leenders Canta Instructions for Installation, Use and Maintenance
22
9. Fitting wallsupport finishing cover
Install the finishing cover by putting the cams into
the slots. Use 2 M8 hexagonal screws from the
MTI bracket to fix the finishing cover if too loose.
Remove the packaging from the jacket.
Push the jacket carefully over the stove without
damaging the paint.
Position the jacket into the right position (if
necessary ) by means of the 2 M6bolts on both
sides of the stove.
10. Placing the casing
Remove the packaging from the jacket.
Push the jacket carefully over the stove without
damaging the paint.
Position the jacket into the right position (if
necessary ) by means of the 2 M6bolts on both
sides of the stove.
11. Installing flue
Push up the smoke outlet at the ceiling plate or
angled smoke outlet.
Place the connection ring around the smoke outlet
and fasten it.
Push the finishing cover over the bolts of the
connection ring.
12. Install the glass
Clean the glass.
Place carefully and with two hands straight down in
the window frame.
Attention! The printed side of the glass pane is the
front side.
On the left and the right in the window frame there
are leaf springs which the glass pane settles itself in
between. Push open the leaf springs carefully with
the glass pane.
Push down the window until they touch.
