Harrie Leenders Canta Instructions for Installation, Use and Maintenance
20
4. Mounting the wall bracket
Mount the wall bracket using the expansionshell
bolts.
Affix 2x flat tape on the vertical strips of the wall
bracket.
1. Unpacking the stove
Remove with care the jacket from the stove by
pushing it up; Don't remove the packaging yet.
Unscrew the MTIbrace from the pallet. Remove
the bolts.
Place the stove including the MTI brace on a
sack truck (back of stove against the sack truck).
2. Ceiling or wall plate
Fasten the ceiling or wall plate using the plugs and
stucco screws provided.
Mark the centre line departing from the saw cut in
the ceiling plate (use the plumb line).
3. Positioning the wall bracket
Determine the centre of the wall bracket.
Drill the upper hole at 712mm from the floor using a
Ø 6mm masonry bit. Use the wall bracket as a
template and a spirit level to drill the other 5 holes
using a Ø 6mm masonry bit. Ream the 6 holes using
a Ø 14mm masonry bit.
