Harpo Mountbatten Brailler Tutor, Руководство пользователя

Страница: 9 / 67

The reading table
Fig. 3 Installing the Reading Table
The reading table can be optionally mounted in its narrow groove as in the picture above.
If you want to read more than three last embossed lines of braille, you will need the
reading table that will make the reading array reach the last embossed 7 braille lines.
Removing the paper bail
Fig. 4 Removing the paper bail
The paper bail is only needed when the MB Tutor operates as a braille embosser. When
using the MB Tutor as a braille writer, we recommend removing it because it is difficult to
read the braille just written with the paper bail in place.
First, lift the paper grip lever on the right to remove the paper bail. Then slide the right-
hand margin adjuster as far right as it will go (if the top cover with reading table was just
taken away, the right margin is already in its far-right position). The adjuster will not move
unless the paper lever has been lifted.
A small spring-loaded sleeve is on the left-hand end of the paper bail. Take this sleeve
between your fingers and push it to the right, releasing the left side of the paper bail from
Mountbatten Brailler Tutor User Manual v. 1.0.3 Page 8