manualshive.com logo in svg

Harper TURBO VAC 60R, Руководство оператора, Страница: 21 / 64

Поделиться
Скачать
Harper TURBO VAC 60R Скачать руководство пользователя страница 21

R

R

Turbo Vac TV60R

TV60RE Hydraulic Oil Reservoir

•  

Maintain the oil level in the reservoir of  

 the 

TV60RE

 between the upper and  

 

lower site bulbs at all times.

•  

Replace the spin-on oil filter (Part no.

 

720043) after every 250 hours of ser- 

 vice. 

TV60RH Hydraulic Oil Reservoir

•  

The 

TV60RH

 is equipped with a HY- 

 

DAC hydraulic oil filter assembly that  

 

is designed for a long service life.

•  

Monitor the needle in the filter indicator

 

daily. The element (Part no. 822002)

 

does not need replaced until the 

 

needle is in the red portion of the   

 gauge.

•  

To replace the element, unscrew the

 

cover, remove the old element and  

 

insert the new one.

To add hydraulic oil to a 

TV60RH

 reservoir:

•  

For small quantities, simply remove  

 

cover and add oil. The oil will seep  

 

past the filter element slowly.

•  

For larger quantities, remove the cover

 

and the filter element. Take extra care

 

that no impurities enter the reservoir.

•  

Maintain the oil level in the reservoir

 

between the FILL and ADD marks on  

 

the dipstick at all times.

•  

Replace the breather (Part no.822018)  

 

whenever the element is replaced.

Note

: The Turbo Vac is filled at the factory

with biodegradable hydraulic oil. Mixing with

regular oil will reduce biodegradability.

SAFETY WARNING!

Escaping hydraulic fluid under pressure

can penetrate skin and cause serious

injury or death.

19

Содержание TURBO VAC 60R

































































Отзывы:

Нет отзывов