Harper TURBO VAC 60R, Руководство оператора

Страница: 12 / 64

R
R
Turbo Vac TV60R
During Service & Maintenance
SAFETY WARNING!
When working under the hopper the
cylinder safety lock should be engaged to
prevent the hopper from falling.
• To engage the cylinder safety lock, take
the pin out of the bracket on the hopper
and pull the handle down.
• The cylinder safety lock prevents the
hopper from being lowered so that
maintenance can be performed safely.
• When finished working under the hop-
per, disengage the safety lock, put the
handle back into the bracket on the
hopper and replace the pin.
SAFETY WARNING!
Attempting to lower the hopper while the
cylinder safety lock is engaged may cause
damage to the cylinder and/or the safety
lock mechanism.
SAFETY WARNING!
If it is necessary to get between the
hopper and the hopper door, set the door
prop to avoid being pinched.
• To set the door prop, pull the door open
and insert prop into pre-cut hole in door.
Safety Decals
• If safety related or instructional decals
become illegible or are removed, re-
place them immediately.
• If parts are replaced, make sure all
safety related or instructional decals
are present before the equipment is
operated again.
• New decals may be obtained from your
local Harper/Goossen Dealer.
10