HK4200
Hopper Maintenance/Service
Liner Inspection
•
The hopper assembly includes a bolt-
on replaceable UHMW plastic liner.
•
To access the liner for inspection,
open the hopper door and install the
hopper door safety lock.
•
Inspect wear liner every 250 hours.
Replace liner before it wears through
to the hopper sheet metal. The part
number for the hopper liner is 302121.
When operating in sandy conditions,
inspect every 100 hours.
Return Air Screens
•
Inspect return air screens located
inside the hopper to ensure that
screens are clear of debris to allow
proper return air flow. Clear debris as
needed.
To move the machine without the engine
running, the park brake must be released,
and
the bypass valve must be opened on the
propulsion pump.
Park Brake Release
•
Each wheel motor contains a park
brake that is mechanically applied
and hydraulically released. When the
engine is OFF the park brakes are
applied to both wheel motors.
PRECAUTION
Towing or pushing the unit with the park
brakes applied may cause serious dam-
age to internal brake parts.
•
The park brakes can be released by
using the brake release tools to
mechanically release the brake
located on each wheel motor. To
accomplish this, follow the steps
below.
Procedure
•
Locate the brake release tools located
on the RH side of the machine near
the manual holder. Remove the tools
from the machine by removing the two
hex nuts.
LINER
RETURN AIR
SCREENS
Tow Procedure
24
