Harper ATM 72 LC, Руководство оператора

Страница: 7 / 88

PRE-START INSTRUCTIONS
BEFORE STARTING: Be sure the engine is properly filled with oil and fuel.
CRANKCASE OIL: Fill the crankcase with an oil that meets the API (American Petroleum
Institute) service designation CE/SF. Do not mix brands or grades of motor oil.
Recommended oil viscosity for expected temperatures are listed in the service schedule on
page 3.1.
SAFETY WARNING!
Do not remove the dipstick while the engine is running.
Oil may blow out the fill tube causing injury.
HYDRAULIC OIL: Make sure that the hydraulic oil in the reservoir is at the proper level on
the dipstick. If not, fill with HD15-40 or HD10-40 motor oil. (HD 15-40 supplied from factory)
RECOMMENDED FUEL: Use clean, fresh, #2 diesel. Refer to the engine manufacturer’s
manual for further information on fuel.
SAFETY WARNING!
Avoid potential explosions! Never fill the fuel tank while
the engine is running!
INSPECTION: Inspect the engine visually before starting. Check for loose or missing parts
and any damage that may have occurred in shipment.
IMPORTANT: Check for loose belts, bolts and hoses after one hour of use and daily
thereafter.
TIRE PRESSURE:
There should be 10-12 psi in the drive tires. Higher pressure will
decrease traction on slopes. Lower pressure may allow tire to pop off of rim.
1.2