Harol SC1000, Руководство по установке

Страница: 2 / 21

INSTALLATION INSTRUCTIONS INTEGRAL SCREEN SC1000 ENVIRO
03/15
|
2
TABLE OF CONTENTS
1. INTRODUCTION 3
2. GENERAL WARNINGS 3
3. LIST OF TOOLS REQUIRED 4
4. INSTALLATION STEPS 5
4.1. Check the package 5
4.2. Check the product 5
4.3. Check the height and width 5
4.4. The actual assembly in 4 steps 6
4.5. Checking for squareness 12
4.6. Checking the assembly 12
5. SERVICE 13-14-15
6. ELECTRICAL CONNECTIONS 16
6.1. Connection diagram for a single pole switch 16
6.2. Adjusting the motor - limit switches 17
7. TROUBLESHOOTING AND REPAIRS 18
7.1. The screen will not roll up or down 18
7.2. The motor hums 18
7.3. The motor does not stop in time 18
7.4. Bottom lath is slanted at the top 18
7.5. Bottom lath drops out of the lateral guides 18
7.6. The fabric tension is too slack; the bottom lath sticks
or shudders when the screen is lowered or raised 18
7.7. Folds and waves in the fabric 18
7.8. The direction of the motor’s rotation does not match the arrows on the switch 18
7.9. The fabric does not stop and roll up again 18
7.10. Automatic control does not operate properly 19
7.11. The bottom lath sticks or shudders when the screen is lowered or raised 19
7.12. Dismantling and removal 19
8. NOTES 20