3
Introduction
In order to provide our customers with quality, reliability and versatility, this product has
been made to strict production standards.
This manual includes all necessary
information about installation, debugging, discharging and maintenance. Read the
manual carefully before you open or maintain the unit. The manufacturer of this
product cannot be held responsible for injuries or damage, as a result of improper
installation, debugging or unnecessary maintenance. It is vital that the instructions of
this manual are adhered at all times. Only qualified persons may install the unit.
○
Only a qualified installer, center, personnel or an authorized dealer, can repair the
unit.
○
Maintenance and operation must be carried out according to the recommended
time and frequency, as stated in this manual.
○
Use genuine standard spare parts only. Failure to comply with these
recommendations will void warranty.
○
The swimming pool heat pump unit heats the swimming pool water and keeps the
temperature constant.
Characteristics
○
Durable: the heating exchanger is made of PVC & Titanium
tube, which can
withstand prolonged exposure to swimming pool water, even water containing salt
for salt electrolysis (typically 0.2-0.5% salt).
○
Easy operation: the unit is very easy to operate. Switch it on and set the desired
pool water temperature.
○
Quiet operation
:
the unit comprises an efficient rotary compressor and a low-noise
fan motor, which guarantees its quiet operation. The unit can heat your swimming
pool water when the air temperature is 10°C or higher.
○
Low cost: the operational cost is very low due to its high performance.
Important!
Gas: Please verify the nameplate of the heat pump which mentions the gas. In case of
R32
gas
, measures for explosion risk need to be taken: It is forbidden to hold an open flame
(cigarette, lighter), in the vicinity of the heat pump. It is forbidden to install the heat pump
in the vicinity of a heat source.
