23
6. Buckle vehicle seat belt into place. Ensure the buckle
is secure by gently pulling on it.
!
BOTH SIDES OF THE LAP BELT AND THE LOWER END
OF THE SHOULDER BELT MUST PASS UNDER BOTH
ARMRESTS.
BOOSTER WITHOUT BACKREST
See “Assembling/Disassembling back support” (pg. 16)
for instructions for removing the backrest.
1. Place the booster seat firmly against the back of a
forward-facing vehicle seat in a position equipped
with a vehicle lap-and-shoulder belt and headrest.
2. Have your child sit on the booster car seat with their
back flat against the vehicle seat.
3. Thread both sides of the lap
belt and the lower end of the
shoulder belt of the 3-point lap-
and-shoulder belt system
UNDER
BOTH
booster seat armrests, and
ensure that the belt is snug across
child’s hips just touching their
thighs and is
NOT
across their
stomach.
WARNING!
!
DUE TO VARYING ANGLES OF VEHICLE SEAT BELT
RETRACTORS, EXCESS SLACK IN THE VEHICLE BELT
SYSTEM MIGHT NOT BE REMOVED AUTOMATICALLY.
Once the lap and shoulder portions of the seat belt
are properly positioned and the buckle is attached,
FEED ANY REMAINING SLACK OF THE SEAT BELT
MANUALLY BACK INTO THE RETRACTOR TO TIGHTEN
THE WHOLE SYSTEM.
