Chapter 2: System installation with the ContentBridge 4000
Figure 2-4: Installing chassis to fixed slides
5. Pull the blue release button in the inner member to release the lock and allow the chassis to slide into
the rack.
6. Install the bottom-most screw at the front to secure the chassis to the rack.
Installing the bezel
Align the bezel in front of the chassis so that the Harmonic logo appears on the top left corner.
1. Connect the USB cable inside the bezel to the right-hand USB port on the front panel. (The other USB
port is covered.)
2. Keeping the corners aligned, press the bezel straight onto the chassis.
Result:
The USB cable will form a loop that fits inside the metal panel of the bezel.
3. Hand-tighten the two captive thumb screws to secure the bezel in place.
18
