Harmonic HRR 4104 Скачать руководство пользователя страница 32

Страница: 32 / 42

Maintenance and Troubleshooting

5–2

5.1.1

Cleaning Patch Cord or Pigtail Fiber Optical Connectors

To clean optical connectors, Harmonic recommends using a fiber optic
connector cleaning cartridge (such as NTT Cletop). If a cleaning cartridge is
not available, follow these steps.

To clean the optical connector of a patch cord or pigtail:

1. Fold a piece of unused dry lens cleaning paper twice, for a four-ply

thickness.

2. Use a drop of high-grade isopropyl alcohol to wet part of the paper.
3. Lay the connector on the lens cleaning paper with the tip touching the

paper.

4. In one continuous motion, pull the connector from the wet part of the

paper to the dry part.

5.1.2

Cleaning HRR 4104 Optical Connectors

To clean the optical connectors of the HRR 4104 receiver:

1. Disconnect the fibers from the optical connectors in the face plate.
2. Use a fiber optic cleaning swab (part number F1-25184 from Fiber

Instrument Sales, or similar) and wet with high-grade isopropyl alcohol.

3. Insert the cleaning swab directly into the adapter until it fully touches the

connector end face inside.

4. Apply light pressure while rotating the swab clockwise one full turn.
5. Insert a second clean (dry) cleaning swab into the adapter until it fully

touches the connector end face inside.

6. Again, apply light pressure while rotating the swab clockwise one full

turn.

7. Reconnect the fibers to the optical connectors.

5.2

Troubleshooting

Should a problem occur, see if the symptoms are listed in Table 5-1.

Table 5-1:

Troubleshooting Solutions

Symptom

Solution

Platform does not recognize
the HRR 4104 module

Verify that the controller cable is connected
between the CPS module and HLP 4200 platform
(see the

CPS 42xx Product Manual

Verify that the HRR 4104 module is fully engaged
with the HMC 4008 carrier. Verify that the
HMC 4008 carrier is fully engaged in the
platform.

If that does not correct the problem, contact
Customer Service (see Section 5.3).

Содержание HRR 4104






































Результаты поиска

Содержание HRR 4104

Отзывы:

Похожие инструкции для HRR 4104

Бренды по названию

Популярные бренды

Harmonic HRR 4104, Руководство по эксплуатации продукта

Результаты поиска

Содержание HRR 4104

Отзывы:

Похожие инструкции для HRR 4104

Бренды по названию

Популярные бренды