SL600HD PINNACLE STAIR LIFT:
Install Manual
25MAR2022 | 75403 E
14
INSTALLATION
PINNACLE HD STAIR LIFT: SECTION 4
Figure 4-25
6. Secure the rear seat support to the footrest/
seat support using the two (2) hex-bolts and
washers. See Figure 4-26.
Figure 4-26
7. Secure the rear of the slider rails to the rear
support using the two (2) socket bolts.
See Figure 4-27.
Figure 4-27
8. Ensure that the seat support is level and
tighten the two (2) front and two (2) rear
leveling bolts. See Figure 4-28.
Figure 4-28
9. Connect the footrest cable to the 6-pin
connector on the chassis. See Figure 4-29.
Figure 4-29
If the wrong set of connectors are used, the unit will
work backwards.
NOTICE
10. Align the seat roller with the slider rails and
slide the seat half way back. See Figure 4-30.
Figure 4-30
When the 6-pin footrest and/or the 8-pin chair cables
are connected to the chassis, the black installation
switch on the chassis is disabled and will not function.
NOTICE
