Outlander Vehicle Lifts:
Owner’s Manual
30JULY2020 | 630-00132 REV B
9
OUTLANDER VEHICLE LIFTS:
SECTION 3
OPERATION
SECURING THE MOBILITY
DEVICE OUTLANDER FULL
For the Outlander Full, the type of securement device
it uses, you may wish to raise the platform halfway by
using the UP toggle switch. If you raise the platform,
you won’t have to bend over while you attach straps
or flip the chair’s armrest out of the way of the hold-
down arm.
See Figure 3-4
.
Figure 3-4
Notes for scooter lifts with a
hold-down foot assembly
On some scooters, it may be necessary to temporarily
move the steering tiller forward to clear the hold-
down foot as it lowers into the lock-down position.
RAISING THE LIFT
1.
When the mobility device is secure, use the UP
toggle switch to continue raising the lift.
2.
Stop raising the lift when it reaches the top
of travel and when you hear the clicking or
ratcheting sound.
3.
Remove the key.
See Figure 3-5.
Figure 3-5
Some scooters have pneumatic (air-inflated) tires. If
your scooter has this type of tire, be sure the tires are
properly inflated. Improper inflation will change the
deck height of the scooter and therefore change the
amount of clamping force the hold-down arm places
on the scooter. The scooter can fall off the lift if not
properly secured.
NOTICE
Ensure that the securement system (whether it’s
a hold-down arm, hold-down foot or straps) has
enough tension to secure the device.
NOTICE
Hold-Down Arm
Straps
