Installing Auto-folding Ramp (optional)
Step 1
Install the ramp roller guide on the side of the
lift tower using the screws already installed in
the panels.
Step 2
Attach the two ramp pivot tabs to the lower
landing sides of the platform. Reinsert the
hex bolts, one of which will go through the
guard panel post, and tighten.
Step 3
Attach the ramp to the pivot tabs using
shoulder bolts and locking nuts. Tighten the
nuts until they seat against the bolt shoulder.
Step 4
Attach the ramp roller arm by bolting it to the
underside of the ramp.
The ramp roller should align and make
contact with the ramp roller guide.
8
