7
helix curved Stair lift - Installation & Service Manual 2014
Part Number: 630-00008- Rev A
Installation
Figure 7-1
Figure 7-2
9. rail Leveling/alignment:
using the angle meter, set the
rail to the correct angles and check the drawing to verify
that all clearances are correct.
10. Supports
Recheck angles then, using the appropriate hardware,
attach the Supports to the stairs, starting at a corner. Firmly
set the supports to the rail with set screw. Repeat the
process at the other corners; recheck angles. complete all
other legs.
[Figure 7-1 & 7-2]
Note:
When installing to stair, ensure the hardware is long
enough. If the carpet is very thick, it might require longer
hardware (not supplied).
Note:
Watch for tack strips. Avoid mounting on them. If you
can't avoid them, shims will be required.
