AL600 & AL690 Hybrid Installation & Owner's Manual 2014
11
TEC0020 17Sep14 P/N: 630-00025 revA
SECTION 2 : INSTALLER
Preparation
LIFT TOWER
TO REMOVE
FROM BASE
STRAIGHT UP
INSTALL BASE AS
INSTRUCTED LATER IN MANUAL.
RE-ATTACH TOWER ONCE BASE IS
MOUNTED IN VEHICLE. RE-CONNECT
4 WAY & LIMIT SWITCH CONNECTORS.
REMOVE 4 NUTS
AT TOWER BASE
9/16”
Figure 11-2
Single Person Installation Option
• We recommend two people install the lift
together. If only one person is available, a
few extra steps make the lift lighter and more
manageable to permit installation.
• Remove connections at limit switch
and remove
power connections at 4-way plug.
[Figure 11-1]
• Remove 4 nuts at tower base .
[Figure 11-2]
• Lift tower straight up to remove from base.
[Figure 11-3
]
• Install base as instructed later in manual.
• Re-attach tower once the base is mounted
in the vehicle. Re-connect 4-way and limit
switches connectors.
Figure 11-1
Figure 11-3