Harmar Access aquajoy premier plus bathlift, Инструкция по установке и эксплуатации

Страница: 6 / 17

• Once situated, press the “down” button to lower the platform
into the bath. Release the button when you are at a
comfortable height for bathing. If you continue to hold the
down button the bath lift will recline 40 degrees once reached
the lowest point.
• Bathe
• When finished bathing, press the “up” button on the hand
control to raise the platform out of the water. Once the platform
is level with the top of the bathtub, release the “up” button.
• After the platform is at the proper height, swing/pull each leg
out and over the side of the bathtub, using caution as all
surfaces maybe slippery. Finally, slide yourself off the
platform and out of the tub.
• Empty water from bathtub.
HOW TO BATHE WITH YOUR AQUAJOY BATHLIFT
• Assemble the lift as describled on Page 3
• Connect the cable of the fully charged battery hand control to the cable on the back of the
backrest. (Match the flat parts of the connections together).
• Fill bathtub with water.
• Push “up” button on the hand control to raise bath lift to the
upper edge of bathtub. Release the “up” button when the seat
of the lift is flush with the top of the tub.
• Sit on the lift perpendicular to the bathtub, and pull/swing
each leg into the bathtub one at a time. Adjust yourself on the
platform so that you are in a comfortable position for bathing.
pg. 5