manualshive.com logo in svg

Harman Studer Micro Series, Руководство по эксплуатации

Поделиться
Скачать
Harman Studer Micro Series Скачать руководство пользователя страница 36

Micro Series

Micro Series 1-19

Document generated: 04.10.17

SW V1.2

[1]

Mute

 button

The Mute button is intended for the use as a cough-button. It is only available  
for channels of the role DJ.

[2]

Talk

 button

The Talk button allows the DJ to talk either to a Guest via the Guest’s head-
phone monitor - or to a N-1 output of a channel of the role “Input for sends”.

[3]

Next

 button

The Next button allows to change to the next audio file of the current playing 
playlist. For details please see 

chapter 2.1.6.1

 Track Player Operation.

[4] Status Display

The Status Display of the Track Player Channel shows the name of the current 
title, as well as a progress bar and the current playing time.

[5]

Jingle

 buttons

The Jingle buttons are used to play specific Jingles from the Jingle channel. 
More Jingle buttons can be found in the Play view.

Содержание Studer Micro Series
















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды