manualshive.com logo in svg

Harman Studer Micro Series, Руководство по эксплуатации, Страница: 23 / 111

Поделиться
Скачать
Harman Studer Micro Series Скачать руководство пользователя страница 23

Micro Series

1-6  Micro Series

Document generated: 04.10.17

SW V1.2

1.2.2

Micro Fader

Up to two Micro Fader modules can be connected to one Micro Core - giving 
access to up to 12 faders. This allows professional Radio OnAir operation. 
Connection is via a single cat5 cable for communication protocol and power.

1.2.2.1

Operating Elements

There are six non-motorized faders. Each channel strip has its own display
Per channel strip, two small option buttons are placed directly below the 
display. Further down, two large buttons are placed above the fader. These 
buttons are used for Rec an Cue functions. Then below the fader there are 
another two large buttons : the On- and the PFL /Off button.

Also a signal indication- as well as an overload LED are placed between the 
fader and the upper two large buttons.

Display

The Micro Fader module provides a two row LCD display to indicate :

     %7 @+

      #

( The background of the function name is inverted when the function is active.)

!'*`      

(default) to blue. The backlight is flashing if a channel that is On-Master is 
pending on snapshot parameter recall.

Buttons

The Micro Fader module features six buttons per channel strip. From top to 
bottom of the strip, they have the following functions :

     # 

on the lower row of the display. (Text 1 and Text 2)

REC

button is the same as the 

REC

 button in the GUI. This button 

contains one yellow LED . The OffAir Record function is indicated yellow.

CUE/Blank

button. This button contains two LEDs, red and yellow. 

(The CUE function is indicated yellow).

ON

button is the same as the 

ON

 button in the GUI. This button contains 

two LEDs, red and yellow.The Channel ON status is indicated red.

PFL/OFF

button.This button contains two LEDs, red and yellow. The 

PFL function is indicated yellow, the OFF function not illuminated.

Содержание Studer Micro Series
















































































































Отзывы:

Нет отзывов