12
13
NANO SERIES - M08BT / M12BT
USER GUIDE
NANO SERIES - M08BT / M12BT
USER GUIDE
®
23. +48V LED
The +48V LED illuminates when the +48 V phantom power (34) is switched on.
24. PWR LED
The PWR LED illuminates when the mixer is properly powered on.
25. OUTPUT LEVEL METER
The 8-segment three-color LED meter constantly indicates the Main Mix output level.
NOTE:
When the MAIN/CTRL button (20) is engaged, this meter switches to indicate the USB return (from the USB
interface (35)) level.
BEST PRACTICES:
For best performance and to avoid overload, please keep the signal within the amber segments at
peak levels.
26. MAIN MIX FADER
The 40mm fader sets the amount of signal sent to the Main Mix output. The adjustable
range is from -∞ to +10dB.
27. MAIN MIX OUTPUT
The MAIN MIX OUTPUT provides two types of connectors: a pair of balanced XLR
connectors and a pair of balanced TRS connectors, and are controlled by the MAIN MIX
fader (26).
28. CTRL ROOM
The CTRL ROOM output includes a pair of L-R TRS connectors, and can be used for
connection of studio monitor speakers or a second set of PA. The Control Room shares
the same monitoring source with the Phones (31): Main Mix output or USB return (from
the USB interface (35)).
29. DFX OUT
The DFX OUT installs a ¼” TRS connector and is used to send signal from DFX bus
to external devices.
30. FOOT SW.
The FOOT SW installs a ¼” TRS connector, and is used to connect an external
footswitch which has the same function as the DFX MUTE button (18).
31. PHONES
The PHONES output appears on a ¼” TRS connector, and is used to send mix signal to a pair of headphones for monitoring. The
Phones shares the same monitoring source with the Control Room (28): Main Mix output or USB return (from the USB interface
(35)).
27
28
29
30
31
Controls and Features
