10
11
NANO SERIES - M08BT / M12BT
USER GUIDE
NANO SERIES - M08BT / M12BT
USER GUIDE
®
9. COMP (CH 1- CH 2 of M08BT, CH 1 - CH 4 of M12BT)
This compressor is designed as a leveling amplifier with moderate attack and release time, with make-up gain correlated to the
COMP knob setting. Rotate the COMP knob to increase the compression amount, with respective make-up gain.
BEST PRACTICES:
The compressor has a fixed threshold of +4 dBu. For effective compression, ensure the post-gain
level is above the threshold.
10. EQ
A 3-band EQ is provided for each MIC input channel (1) whereas for the RCA stereo input
channel (5), a 2-band EQ is available. All bands provide up to 15 dB of boost or cut.
HI
This knob gives an up to 15 dB boost or cut above 12 kHz
.
Turn the knob up to
boost frequencies above 12 kHz, to add transparency to vocals and guitar or make
cymbals crispier. Turn the knob down to cut frequencies above 12 kHz, to reduce
sibilance of human voice or hiss of a tape player.
MID
This knob gives an up to 15 dB boost or cut at 2.5 kHz. Because this mid band
covers the most fundamental frequencies of all musical instruments and human vocals, careful use of this knob may give
creative improvement to the sound performance.
LOW
This knob gives an up to 15 dB boost or cut below 80 Hz. Turn this knob up to boost frequencies below 80 Hz, to add more
punch to bass drum and bass guitar. Turn it down to cut frequencies below 80 Hz, to reduce low frequency vibrations and
resonance.
11. DFX POST
Rotate the DFX POST knob to adjust the post fader signal sent to DFX bus.
NOTE:
To prevent DFX distortion, please rotate this knob counterclockwise when
the PEAK / MUTE LED (17) lights red.
12. PAN / BAL
Rotate the PAN knob to move a mono signal from left to right. Rotate the BAL knob to move
the entire stereo image from left to right.
13. PEAK LED
The PEAK LED lights on when the channel signal is about to clip or distort.
14. CHANNEL LEVEL FADER
The 40mm fader allows precise balancing of various channel signals being mixed to the
main output. The adjustable range is from -∞ to +10 dB.
15. DIGITAL EFFECTS
The LED screen displays the effect preset selected.
10
11
12
13
14
Controls and Features
