Harman Martin VDO Dotron, Руководство пользователя

Страница: 12 / 40

12 VDO Dotron User Manual
Physical installation
Warning! Read “Safety information” on page 6 before installing the VDO Dotron and read all of this
‘Physical installation’ chapter before starting work.
You can install VDO Dotron dots on a surface or structure using one of four methods:
• You can mount dots on VDO Dotron Flange Brackets and then fasten the Flange Brackets to the surface
or structure.
• You can mount dots on VDO Dotron Half-Coupler Rigging Clamps and then fasten them to a rigging truss.
• You can mount dots on VDO Sceptron/Fatron End Couplers and fasten them to the end of VDO Sceptron
or VDO Fatron creative video fixtures from Martin®.
• You can mount dots on VDO Sceptron/Fatron Pivot Couplers and fasten them between the ends of VDO
Sceptron or VDO Fatron creative video fixtures from Martin®. The pivot couplers let you quickly lock the
VDO Sceptron or VDO Fatron fixtures at an angle.
The VDO Dotron can be installed in any orientation.
Allow free airflow around dots and at least 10 mm (0.4 in.) of clearance around the front surface.
The VDO Dotron is designed to withstand water projections such as rainfall and low-pressure water jets and
can be installed outdoors, but do not submerge it and do not install it in a location where water can build up
around the dot or under the base of the dot. If necessary, provide drainage at the installation location.
Avoiding damage
Avoid causing damage that is not covered by the product warranty by following these instructions carefully.
Keeping connections dry
Moisture on connectors can cause short circuits and damage to products. Check that all connectors are
perfectly dry before you connect them. Do not install the VDO Dotron during wet weather conditions or if
condensation is visible on any surfaces.
Avoiding shocks and stress
Do not expose the VDO Dotron to physical shocks (by dropping onto a hard surface, for example).
Do not apply pressure to or otherwise stress diffusers or lenses.
Do not stress cables (by bending them sharply, for example). Protect cables from sharp edges.
www.audiovias.com