Harman Martin RUSH MH 8 Mini Profile, Руководство пользователя

Страница: 18 / 36

18 RUSH™ MH 8 Mini Profile User Manual
Dimmer calibrate
The dimmer calibration function allows you to decrease output to achieve
uniform dimming with other fixtures. (If a fixture’s output appears to be low,
verify that the DIMMER CALIBRATE level is 100.)
To calibrate dimming on a fixture on which the light output is too high:
1. Select DIMMER CALIBRATE and press ENTER to confirm.
2. Use the DOWN and UP buttons to adjust light output to a level between 50
and 100. The default level is 100 (full intensity).
3. Press ENTER to confirm.
Backlight
To turn the control panel display backlight on or off:
1. Select BACK LIGHT and press ENTER to confirm. The present mode will
blink in the display.
2. Use the DOWN and UP buttons to select ON or OFF.
3. Press ENTER to save your selection.
Fixture time
To display the fixture’s operating hours counter, select FIXTURE TIME and
press ENTER. The display will show the number of hours the fixture has been
in operation since manufacture. Press MENU to exit.
Reset
The fixture resets each time you power it on, but you can also reset the fixture
manually from the control panel and by DMX. To carry out a manual reset,
scroll to RESET and press ENTER to reset the fixture, or press MENU to exit
without resetting. A reset takes approx. 20 seconds. After this, the fixture
returns to its state before the reset.
Fan mode
Fan speed can be adjusted to maximize light output or quiet operation.
1. Select FAN MODE and press ENTER.
2. Using the DOWN and UP buttons, toggle between the two modes:
-
LOW. Fans run at constant low speed for quieter operation. Light
output is reduced when necessary to control fixture temperature.
-
AUTO. Fan speed increases when necessary to control fixture
temperature, but light output is constant.
3. Press ENTER to confirm your choice.