Harman Martin ERA 800 Performance, Руководство пользователя

Страница: 4 / 26

4
ERA 800 Performance User Guide
Introduction
Warning! Before installing, operating or servicing the ERA 800 Performance, read the latest version
of the product’s Safety and Installation Manual, paying particular attention to the Safety Precautions
section. The Safety and Installation Manual is supplied with the fixture. The latest version is also
available for download from the ERA 800 Performance area of the Martin® website at
www.martin.com.
This User Guide is a supplement to the Installation and Safety Manual that is supplied with the ERA 800
Performance. Both these documents are available for download from the ERA 800 Performance area of the
Martin website at www.martin.com. This User Guide contains information that is mainly of interest for
lighting designers and operators, whereas the Safety and Installation Manual contains important information
for all users, especially installers and technicians.
We recommend that you check the Martin website regularly for updated documentation, because we
publish revised versions each time we can improve the quality of the information we provide and each time
we release new firmware with changes or new features. Each time we revise this guide we list any important
changes on page 2 so that you can keep track of updates.
Operating the fixture
Before applying power to or operating the ERA 800 Performance:
• Read the ‘Safety Information’ section of the fixture’s Safety and Installation Manual.
• Check that the installation is safe and secure.
• Check that the base is fastened securely so that the torque reaction when the head moves will not cause
the base to move.
• Check that the head tilt lock is released.
• Be prepared for the fixture to light up suddenly. Check that no-one is looking at the fixture from close
range.
• Be prepared for the head to move suddenly. Check that there will be no risk of collision with persons or
objects.
The ERA 800 Performance does not have an On/Off switch. To apply power to the fixture, apply power to the
power input cable. The fixture’s Neutrik powerCON TRUE1 connectors can also be connected live or under
load.