Harman Martin ERA 150 Wash, Руководство пользователя

Страница: 15 / 52

Martin ® ERA 150 Wash User Guide 15
AC power
Warning! Rea d ‘ Safety information ’ on page 4 before
connecting th e fixture to AC mains power.
Before you connect other fixtures to the POWER OUT socket,
see ‘ Linking fixtures to power in a chain ’ on page 15.
For protection from electric shock, the fixture must be
grounded (earthed). The power distribution circuit must be
equipped with a fuse or circuit breaker and ground-fault (earth-
fault) protection.
Socket outlets or external power switches used to supply the
fixture with power must be located near the fixture and easily
accessible so that the fixtures can easily be disconnected from
power.
The fixture requires a power input cable with a Neutrik powerCON TRUE1
NAC3FX-W (TOP) female cable connector for AC mains power input. The
cable must meet the
requirements listed under “ Protection from electric
shock ” on page 5. Martin can supply suitable cables with female TRUE1
TOP input connectors 1.5 m (4.9 ft.) or 5 m (16.4 ft.) long, as well as loose
female TRUE1 TOP
input connectors (see “ Accessories ” on page 49).
The fixture can be hard-wired to a building electrical installation if you want
to install it permanently, or a power plug that is suitable for the local power
outlets can be installed on the power cable. If you install a power plug on the
power cable, follow the plug manufacturer’s instructions and connect the
wires in the power cable as shown in this table:
Live or L Neutral or N
Earth, Ground or
US system Black White Green
EU system Brown Blue Yellow/green
The fixture has an auto-ranging power supply that accepts AC mains power
at 100-240 V at 50/60 Hz. Do not apply AC mains power at any other
voltage or frequency to the fixture.
Linking fixtures to power in a chain
If you obtain a 12 AWG / 2.5 mm
2
power input cable and 12 AWG / 2.5 mm
2
throughput cables from Martin (see “ Accessories ” on page 49), you can
relay mains power from one fixture to another by connecting fixtures to