Harman JBLBAR800PROBLKEP, Руководство пользователя

Страница: 22 / 29

22 22
8. SOUND SETTINGS
8.1 Audio sync
With the audio sync function, you can synchronize audio and
video to make sure that no delay is heard from your video content.
1. On the remote control, press and hold
TV for more than three
seconds and then, press .
J “SYNC” is displayed.
2. Within five seconds, press or on the remote control to
adjust the audio delay and match with video.
J The audio sync timing is displayed.
8.2 Smart mode
With the smart mode enabled by default, you can enjoy TV
programs with rich sound effects. For TV programs such as
news and weather forecasts, you can reduce sound effects by
disabling the smart mode and switching to the standard mode.
Smart mode:
EQ settings and JBL Surround Sound are applied
for rich sound effects.
Standard mode: The preset EQ settings are applied for standard
sound effects.
To disable the smart mode, do the following:
• On the remote control, press and hold for more than three
seconds and then, press .
J
You switch to another mode. “OFF SMART MODE” : The
standard mode is enabled.
J Next time you switch on the soundbar, the smart mode is
enabled again automatically .
8.3 PureVoice dialogue enhancement
technology
By taking advantage of the PureVoice dialogue enhancement
technology, the PureVoice allows you to enhance vocal clarity
and easily hear and understand speech.
By default, the PureVoice is enabled if you play movies from the
TV/ HDMI IN source; and the PureVoice is disabled if you stream
music over Bluetooth, Chromecast built-in, Alexa and AirPlay.
To disable or enable the voice mode,
• On the remote control, press and hold
for more than five
seconds and then, press .
J
“ON PUREVOICE” : The PureVoice is enabled.
J “OFF PUREVOICE” : The PureVoice is disabled.
J
Next time you switch on the soundbar, the Purevoice is
enabled again automatically .
9. RESTORE FACTORY SETTINGS
By restoring the default settings defined at factories, you remove
all your personalized settings from the soundbar.
• On the soundbar, press and hold , and for more than
5 seconds.
J
“RESET” is displayed.
J The soundbar restarts.